Brakes/Levers/Pads

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Standard linear pull brake pads for an economical replacement. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Standard compound (STD)—All-around rubber pad compound - Sold in pairs

With Bontrager's Race XXX Lite Aero Brake Levers you'll get winning aerodynamics with no-compromise ergonomics, comfort and power. Not only are they aero, they're super light, thanks to full carbon construction. They have adjustable reach, and combined with the high-fulcrum cable pull and stiff return spring, they offer the best lever feel available. No squishy braking, they stop you like they mean it. Tool-free adjustable cable tension means you can tune your brakes on the fly or switch between your race wheels and your training wheels easily, too. They fit any bullhorn style bars with internal routing.

Take Cane Creek's SCR-3L Front Brake Caliper on the road with you. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the SCR-3 brakes offer excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick release and adjustment barrel.

Take Cane Creek's SCR-3L Rear Brake Caliper on the road with you. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the SCR-3 brakes offer excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick release and adjustment barrel.

- cold forged aluminum sidepull brake with quick release - Standard pull rear, reverse pull front - Pads included

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

Caliper Mounting Bolts for Hayes hydraulic disc brake systems.

Hose fittings for Hayes hydraulic disc brakes

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing